Parts

Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated. - High-strength plastic composite

• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. Shifting one gear or the whole range is simple with just a twist of the wrist. They shift a 2:1 Shimano rear derailleur and a SRAM or Shimano derailleur up front.

Shimano BB-ES300 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included

• Forged aluminum • Integrated micro-adjust seat clamp

• Square taper interface • Only includes left crank

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

- Hayes service parts for calipers - Rebuild kits include: (2) caliper pistons with square profile seals, transfer port o-ring, and caliper bleeder with cap

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

High performing square bottom bracket interfaces with English frames. - Fits square-taper spindle cranksets - Alloy adjustable cups - Includes 2 axle bolts

The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach

- For IG/HG chains - Zinc phosphate finish - Enlarged sprocket window design for ligtherweight

Shimano Sora BL-R3000 Road Brake Levers - Design to seamlessly function with SL-R3000 - Brake lever is compatible with a wide variety of brake calipers - Not compatible with linear-pull brakes - Brake Lever Actuation: Short Pull

• Forged steel • Square taper • Compatible with 9/16" pedals • Pairs • Cotterless

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

ENVE replacement brake pads for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Our brake pads are specifically formulated and optimized for best performance with our molded-in texture brake tracks found on the Smart ENVE System (SES) wheels. - Only for use with the updated brake track found on ENVE SES 2.2, SES 7.8, and most recent versions of SES 3.4, and SES 4.5 wheels.

These replacement brake pads are designed specifically for full-carbon ENVE rims and wheelsets with a smooth surface brake track. Carbon fiber rim construction and design are only part of the solution to solving the heat equation. Brake pads play an integral role in ride performance and long-term durability of the wheel.

A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

- Large Raised Multi-Striped Areas Help Enhance Vibration Damping - Multi-Stripe Pattern Provides Optimal Friction In All Directions - Unique Polymer Compound Helps Improve Durability - Giant 1.0 Lightweight Aluminum Single Lock-On System

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs