Protective/Armor

Replacement d-ring for Titan guard. - Fox Racing official replacement parts

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Left-hand specific - Protection Area: Wrist - Pad Type: Foam

The Revive wrist support features a 4-way stretch elastic with a Stabalite buttress support to aid in preventing hyperextension. - One size fits most - Right-hand specific - Protection Area: Wrist - Pad Type: Foam

Replacement F3 chest armor insert. - Fox Racing official replacement parts - Material: 100% PU

Replacement D3O impact-absorbing inserts. Sold in pairs.

LP1 D3O ELBOW INSERT - ORG

LP1 D3O SHOULDER INSERT - ORG

Replacement elbow inserts for Enduro D3O Elbow Guard. Sold in pairs.

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5mm perforated Airprene, 1/4 inch foam inserts, injected molded plastic inserts and a 2mm Powertex crash panel.

The Invisa-Lite elbow pads feature a lightweight, minimalist design. - Impact-resistant 3D foams - Breathable lycra - Interior anti-slip silicone band - Double and single needle heavy-duty stitching - Protection Area: Elbow - Pad Type: Foam

The Invisa-Lite knee pads feature 3D foam, Lycra compression fit and anti-slip silicone. - Breathable, lightweight Lycra body - Double and single needle heavy-duty stitching - Protection Area: Knee - Pad Type: Foam

Invisa-Lite shin guards feature harder durometer 3D foam on the outside and an inner softer layer for comfort. - Breathable, lightweight lycra body - Interior anti-slip silicone band - Protection Area: Shin - Pad Type: Foam

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Anti-abrasion material at calf protects sleeve and skin against pedal strikes - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

- Impact-absorbing SmartFlex pads shield your hips from unexpected impacts - Silicone grippers on the back of each pad assure they stay in place - Ventilated pads - Pads are waterproof and will not absorb water or sweat

The Dakine DK Impact Spine Protector is add-on back protection that's compatible with multiple Dakine snow and bike packs. The proprietary foam displaces hard impacts in the event of a fall to minimize injury to the central back. Add an extra layer of protection with this CE EN 1621-1 certified protection. - DK Impact Foam displaces hard impact and protects the central back - Thin, flexible profile - CE EN 1621-1 certification - Fits inside multiple snow and bike packs

Taking a few spills is part of learning how to be a better bike rider. Our youth body armor is designed to stay in place comfortably the whole ride, so it' there when you need it. They are constructed using the same impact-absorbing D30 material we use in our adult line of knee and elbow pads. We downsized our body armor for juniors and made it in three sizes to stay comfortably in place, because the best pads are the ones that actually get worn. A layer of tough Cordura ® nylon helps these pads stand up to rough and tumble riding.

The Charge Elbow Pads feature targeted foam protection and stretchy mesh for a superior fit and low bulk. - Butterfly mesh sleeve with second-skin fit and targeted coverage - Foam panel with stretch-Kevlar cover for durability against nicks and abrasions - Silicone gripper along inner top opening ensures a stay-put fit

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Taking a few spills is part of learning how to be a better bike rider. Our youth body armor is designed to stay in place comfortably the whole ride, so it' there when you need it. They are constructed using the same impact-absorbing D30 material we use in our adult line of knee and elbow pads. We downsized our body armor for juniors and made it in three sizes to stay comfortably in place, because the best pads are the ones that actually get worn. A layer of tough Cordura ® nylon helps these pads stand up to rough and tumble riding.

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

When you need some peace of mind on your XC/Trail ride then look at the Charge knee pad for abrasion protection without sacrificing any pedaling comfort. - Butterfly mesh sleeve provides a secure yet breathable fit - Foam panel with stretch cover for abrasion protection - Strategic seam construction for added overall comfort - Silicone gripper along inner top opening plus silicone patch at shin ensures a secure fit - This pad is NOT rated for impact; It is recommended for abrasion-resistance protection only

RIDECAMP is your simple, sleek and effective choice for cross-country and light-duty ride needs. - Lightweight slip-on sleeves - Pre-curved chassis for attack position - Lightly padded nylon anti-abrasion outer skin - Fully perforated neoprene chassis for breathability - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - CE Directive 89/686/EEC MTB

TERATEC Protection is designed with the principle of right materials, in all the right places. Primarily designed for enduro/all mountain, these guards offer Level 1 impact protection while still offering maximum breathability and flexibility for everyday use. - Sleek slip-on sleeves - Pre-curved chassis for attack position - Moderately padded with nylon anti-abrasion outer skin - Tacky silicone elastic webbing to prevent slippage - Fully ventilated rear mesh for maximum cooling - Impacted Tested with Level 1 Protection

You can't wear bulky, uncomfortable pads that hold you back. But when the elements turn against you, it could put you on the sideline, and you can't let that happen. With Pro-X3 Elbow Pads, you have the protection you need, when you need it. The rest of the time, you won't even know it's there. Go ride! - Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.

- Body-mapped, impact-absorbing SmartFlex pads layered on top of a ventilated, soft inner foam layer allowing for maximum protection, comfort, and breathability - SmartFlex pads offer form-fitting and lightweight protection that is flexible as you ride and hardens on impact - Moisture-wicking, UPF 50+ fabric - Machine washable - Compression sleeves with grippers at the top and bottom to keep guards in place - CE 15613 impact with 1621 coverage

Lightweight and breathable enough to forget you're wearing them, the Slayer Bike Elbow Sleeves offer low-profile padding for hot days and all-mountain rides. The form-fitting design uses energy-absorbing DK Impact foam for a flexible fit that conforms to match your arm. Snug-fitting four-way stretch mesh with gripper strips keep them in place, and built-in odor control helps manage the stink. - 4-way stretch mesh back: 70% Polyester 30% Nylon - Insert: 100% DK Impact Polyurethane foam - Our lightest, lowest-profile, most-breathable elbow pad - Perforated DK Impact energy-absorbing foam technology - Aramid ripstop shell - Polygiene Odor Control technology - Seamless calf band and silicone gripper elastic keep pad in place - Pre-curved ergonomic patterning for enhanced fit

A great pair of elbow guards needs to be comfortable in dynamic movement. The Summit Elbow Guards provide CE-certified protection that you can comfortably ride in all day, thanks to an innovative low-profile D3O® pad. We used lightweight 4-way stretch Cordura® fabric on the impact zones with breathable mesh back panels for comfort. These guards are the perfect choice for trail riders who want a bit more protection, but don’t want to slow down.

- Removable D3O T4 Trio foam pad provides impact protection. - Mesh sleeve fabric for breathability and comfort. - Silicone gripper plus hook and loop strap closure for a secure fit. - Abrasion-resistant elbow cover for durability. - Unisex size range