Parts & Accessories
$0.69
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- 32 nipples weigh approximately 30 grams
$0.79 - $45.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$1.29 - $24.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$1.75 - $4.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$5.99
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable
$11.99
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention
$14.99 - $21.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.
$15.00
Designed to fit most rear hubs, sliding over the existing hardware on the non-drive side. Constructed from 100% heat-treated chromoly, the Mission Guard is guaranteed to hold up to a long life of grinds on all surfaces!
Product Specifications
- Material: Heat Treated Chromoly
- Axle Size: 14mm
- Compatibility: Most rear hubs
- Weight: 4.0oz
$15.99 - $29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings.
- 26mm OD x 15mm ID
- 7mm thick
$20.00 - $23.00
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs
- SealLock end caps feature a low friction U-cup seal that snaps into place
$24.99 - $34.99
The Kink Universal Driver guard is designed to fit most modern freecoaster and cassette hubs using either an 8T or 9T driver. The guard is made from heat-treated chromoly steel, giving it a ton of strength and long lifespan. The slim chromoly design means it can slide between your existing hub hardware and dropout, which allows for easy installation with only a wrench or socket to loosen and tighten axle nuts
$24.99 - $29.00
Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool.
Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.
$24.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$26.99
Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable.
- Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers)
- Plug has O-ring retention – no tool required
$29.99 - $36.99
V2 Tubeless valves are stronger, lighter, and even easier to use thanks to the machined aircraft grade 7075 aluminum and Muc-Off's new Tire Insert air ?ow system. The new design features six slots that are machined into the base of the valve stem, allows tubeless sealant ?uid and air to ?ow freely, even when running tubeless tire inserts.
- 7075 Machined Aluminum valve stem and cap
- Tire Insert air flow system keep air moving freely and compatible with most tire foam inserts
- 4mm machined Allen Key slot for easy installation and removal
- Includes Valve Core Removal Tool (integrated into spare alloy cap)
- Supplied with various rubber bases to optimize fit with multiple rim types
$39.99 - $73.99
- Grade 3 balls and magnetite rust proof finish
- Abec 5 precision and silicone w seals
- 3 times cryogenic race treatment
- Bearings sold individually, not as pair
$39.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Conical X12 washer, compatible with Syntace X-12 system
- Thread Pitch: 12 x 1.0mm
$69.95
Replacement XD driver freehub body for Trail and Vantage 2-piece Ritchey hubs.
- SRAM XD
Page 1 of 1