Other

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

Replacement bushings for Cane Creek shocks.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Cane Creek crown races are interchangeable between headset series. - Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames - May be required to fit Manitou Mastodon Mukluk Carbon frames

ZN40-Series bearings are corrosion-resistant zinc-coated, machined steel cartridge bearings with hardened steel balls, which vastly increases the longevity of your headset. Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

Seal kit replacement for Diamond model suspension forks.

- Grade 10 chromium steel balls

This 440C stainless steel material provides maximum corrosion resistance for bearings. Stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings. Enduro Bearings uses LLB-type seals and CRC Marine Grease in these bearings to additionally waterproof against the elements. - 440C stainless steel balls and races

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

Air spring seal kits for Fox suspension repair and rebuild.

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

FSA Service Parts for BB30 Frames

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

- Replacement V-brake pads - Wear limit mark - Ultra-light 6061-t6 forged pad holder - Compatible with Shimano, SRAM, TRP, and all major brands of V-brakes

-Seatpost mounted Di2 Battery Holder for ISP/Vector/D-Fuse models

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

- Includes: 2x2.5mm, 1x5mm, 1x10mm.

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.